Havis-Shields Dome Light KR-DL User Manual download pdf

Dome Light KR-DL

Installation Instructions

Warning: Please read all instructions and warnings prior to installation of the Dome Light.

TOOLS REQUIRED:

Phillips Screw Driver

Wire Cutter

HARDWARE: (Supplied in Kit)

Qty. Description Qty. Description

2 #8-32 Machine Screw 2 #8 Fender Washer

2 #8 KEP Nut 2 #8 Sheet Metal Screw

INSTALLATION:

1. Mounting:

• A drill template is provided on the back of this instruction sheet. Detach the

template, position it on the desired location for installation, and mark drill locations.

Caution: Before drilling holes, ensure that the mounting surfaces are clear and that the

screws will not damage the internal parts of the vehicle.

Caution: Ensure that the Dome Light is installed in areas recommended by the vehicle

manufacturer.

• Drill the mounting holes.

• Connect the power leads using wire splices.

• Remove the template prior to installing the fixture. Secure the base of the fixture in

position using the supplied machine screws, washers, and nuts.

Caution: Thread forming screws are supplied for alternate installations. If the fixture needs to

be mounted with thread forming screws, please note that it may not always be sufficiently

secured. It is at the sole discretion of the installer to determine the suitability of using thread-

forming screws for a particular installation.

• The fixture is supplied with two clear lenses and two red lenses. Install two lenses

suitable for the vehicle.

• Test the fixture for proper operation.

1 2

Dome Light KR-DL Installation Instructions Warning: Please read all instructions and warnings prior to installation of the Dome Light. TOOLS R

KR-DL-INST-9-05 Caution: The Dome Light uses bulbs which can be VERY HOT! Do not touch a bare bulb when it is lighted. 2. Operation: • The fixt

No comments

Havis-Shields Dome Light KR-DL User Manual