Havis-shields CHEVY IMPALA WGI-C12 User Manual download pdf

WGI-C12-INST-10-04

INSTALLATION INSTRUCTIONS

MODEL WGI-C12

INTERIOR WINDOW GUARD KIT

2000-2005 CHEVY IMPALA

TOOLS REQUIRED:

Eye Safety Goggles

Power Drill

1/8” Drill Bit

Phillips Screw Driver

HARDWARE SUPPLIED:

QTY DESCRIPTION PART #

22 #10 x ½” Phillips Sheet Metal Screw GSM33194

1 Driver Side Window Guard WGI-C12-1

1 Passenger Side Window Guard WGI-C12-6

INSTALLATION:

1. First determine the correct window guard for each window. The bottom of each guard is

numbered, signifying its’ location.

2. Open door and hold the window guard up to the window door frame. NOTE: The angle at the

bottom of the guard framework faces towards the outside of the car. The guard framework fits

evenly around the window frame.

3. Mark a few holes at the top of the door frame using the pre-drilled holes on the guard framework

as a guide.

Note: Do not mark holes for the sides or bottom yet.

4. Remove window guard and drill holes as marked with a drill bit.

5. Attach window guard by using #10 x ½” sheet metal screws. Now locate and mark balance of

holes, drill and attach, starting at top and working your way down.

6. Follow the same steps for the other side of the vehicle.

WGI-C12-INST-10-04 INSTALLATION INSTRUCTIONS MODEL WGI-C12 INTERIOR WINDOW GUARD KIT 2000-2005 CHEVY IMPALA TOOLS REQUIRED: Eye Safety Goggles

No comments

Havis-shields CHEVY IMPALA WGI-C12 User Manual