Havis-shields C-VS-1300-TBZ User Manual

Browse online or download User Manual for For the car Havis-shields C-VS-1300-TBZ. Havis-Shields C-VS-1300-TBZ User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
4
INSTALL INSTRUCTIONS C-VS-1300-TBZ
VEHICLE SPECIFIC CONSOLE
2006-2008 CHEVROLET TRAILBLAZER
TOOLS REQUIRED:
Phillips screwdriver
T-15 Torx driver
T-20 Torx driver
7/16 wrench
Ratchet wrench
7/16” socket
15mm socket
Jig Saw or plastic cutting tool
Eye goggles
HARDWARE:
QTY DESCRIPTION PART #
1 Trailblazer vehicle specific console C-VS-1300-TBZ-H
1 Bail bracket C-B1
1 Rear hump bracket set C-B27
1 Duct block off plate CM001516
2 Side “L” brackets CM93594
1 Console hardware kit C-HK
1 Torx screw kit C-HK-1
1 #10x1/2 PPHSMS (Block off plate screw) GSM33194
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Disconnect the vehicle battery. Removing seat bolts on some vehicles may give the vehicles
computer a false reading, causing a warning light on the instrument cluster. This requires the
vehicles’ computer to be reset with a vehicle diagnostics tool.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use only hardware provided with install kit.
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
, email [email protected] or call
1-800-524-9900 and ask for technical support.
Page view 0
1 2 3 4

Summary of Contents

Page 1 - VEHICLE SPECIFIC CONSOLE

4 INSTALL INSTRUCTIONS C-VS-1300-TBZ VEHICLE SPECIFIC CONSOLE 2006-2008 CHEVROLET TRAILBLAZER TOOLS REQUIRED:  Phillips screwdriver  T-15 Torx

Page 2 - C-VS-1300-TBZ_INST_9-07

C-VS-1300-TBZ_INST_9-07 2 Remove six phillips screws that holdinner storage pocket. Remove storage pocket and arm rest assembly. Remove main conso

Page 3

C-VS-1300-TBZ_INST_9-07 3 Extend cut line on console sides. Carefully cut off back console section. (Jig saw, Air saw, Dremel or Air drill) Caref

Page 4

C-VS-1300-TBZ_INST_9-07 4 Finish wiring and complete installation

Related models: C-B27 | CM001516 | C-HK |

Comments to this Manuals

No comments